Vanquish Products Ripper Project

17-7-29 16:45| 发布者: rcfans| 查看: 10731| 评论: 28

以制造攀爬遥控车车桥和升级改装零件闻名的Vanquish Products(以下简称VP)宣布将推出高端的定制攀爬遥控车升级改装套件 “Ripper Project”，让玩家打造一台极致的防滚笼式攀爬越野遥控车。套件售价将高达1899美元，目前开始预订，定金为500美元，预计10月20日开始发货。这款限量制造的套件实际上是需要基于Axial SCX10-2车架进行升级，如此高的价格是有原因的，限量制造，并且采用超过45公斤的铝原材进行CNC加工，所以VP在预订说明内强调，定金是不退还的。

http://v.youku.com/v_show/id_XMjkzMTMxMTAwNA==.html

花费1899美元后，你将得到:
    CNC Milled Chassis - Driver Side
    CNC Milled Chassis - Passenger Side
    CNC Milled Chassis - Front Crossmember/Shock Mount
    CNC Milled Chassis - Roof
    CNC Milled Chassis - Rear Crossmember/Shock Mount/Spare Tire holder
    CNC Milled Driver Side Body Panel
    CNC Milled Passenger Side Body Panel
    CNC Milled Hood
    CNC Milled Grill with Rigid Q-series Light Mounts
    Laser Cut Rear Number Plate (2)
    Laser Cut Roof Panel
    Q-series Lights (Headlights)
    4" Rigid Light Bar (Red LED strip)
    Rocker Supports
    Delrin Rocker Skids
    Hood Vents (3d Printed)
    Front Radiator (3d Printed)
    40mm 12v brushless fan
    Battery Box (3d Printed)
    ESC Mount (3d Printed)
    Sway Bar Set
    Stainless Link Kit
    Hardware

完成整车你还需要:
    SCX10-2 Chassis rails
    SCX10-2 RTR skid plate (or original SCX10 skid plate)
    SCX10 Bumper that bolts in between the frame rails (not to the outside) and is under 3.75in wide
    SCX10 Rear chassis crossmember
    Axial 3-gear transmission (complete with slipper and spur gear assembly)
    Axial Bomber Interior
    Axial Yeti Fuel Cell
    Axial EXO radiator
    Vanquish Products SCX10-2 F9 front axle with servo on axle mount
    SCX10-2 knuckles and kingpin bushings
    SCX10-2 rear axle of either style (Currie RockJock or F9)
    SCX10-2 axle internals (gears, shafts, lockers, hexes, etc)
    SCX10 driveshafts (this truck has a wheelbase slightly longer than the standard 12.3in but most SCX10 compatible driveshafts should work without an issue)
    5 - Vanquish 1.9 wheels with 475 hubs (or 350 hubs if using the KMC XD Center Cap)
    5 - Tires and foams (max tire size of 4.75in, when using the maximum tire size you will experience some rubbing still)
    90mm scale style shocks (up to a 4in shock will work but larger bore shocks may have clearance issues with the rear sway bar)
    Bearings and hardware

http://www.vanquishproducts.com/pre-order-deposit-cnc-milled-ripper-project/